Clone-A-Willy Glow in the Dark Original

The glow version adds a third component to the usual two. The mold comes off algae-based powder, glow powder is stirred through the platinum-cure medical-grade silicone, and that mixture fills the mold to make a clone that holds light rather than merely reflecting it. The thermometer handles the water temperature, since that's what governs how quickly the molding powder firms up. The result is a glow-in-the-dark pink clone with a motor already inside it. The tube is 10.8 inches by 2.5, the silicone is medical-grade platinum cure throughout, and the kit comes from Empire Labs. Measure first, take the mold, then stir the glow through before you pour. Expert Tip: Stir the glow powder all the way through the silicone before any of it reaches the mold. Pigment left sitting in one spot gives you a clone that glows in patches. Measurements Molding Tube Length: 10.8" Molding Tube Width: 2.5" Vibration: Single speed Clone Material: 100% Platinum-Cure Medical-Grade Silicone Molding Material: Algae-based molding powder Included In The Set: Silicone, glow powder, molding powder, molding tube, single-speed vibrator, stir stick, disposable thermometer, instructions Not Included: Scissors, mixing bowl and utensils, disposable bowl or cup, cardboard square Lube: Water-based only Color: Glow-In-The-Dark Pink Care: Use with water-based lubricant. Wash with warm water and toy cleaner after each use. Pat dry and store in a cool, dry location, away from direct sunlight and separated from other toys.

Product Highlights:

• Glow Powder Mixes Into The Silicone: Stirred through the silicone ahead of the pour, making the whole clone luminous rather than leaving you with a coating on the outside.
• Algae-Based Molding Powder: Water and the algae-based powder go into a bowl of your own, firming up quickly and recording surface detail right down to skin texture.
• Platinum-Cure Medical-Grade Silicone: Once the mold has set, the glow-loaded silicone goes in to form the clone, leaving you a body-safe piece that holds its shape for the long haul.
• Single-Speed Vibrator Included: Bedded into the clone during the cure, meaning there's nothing left to put together afterwards.
• 10.8 Inch Molding Tube: Holding 10.8 inches by 2.5 of space, setting the ceiling on what will fit, so check before you commit to anything.
• What Is In The Box And What Is Not: The box holds glow powder, silicone, molding powder, the tube, the vibrator, a stir stick, a thermometer and instructions, leaving scissors, a bowl and some cardboard for you to find.

The glow version adds a third component to the usual two. The mold comes off algae-based powder, glow powder is stirred through the platinum-cure medical-grade silicone, and that mixture fills the mold to make a clone that holds light rather than merely reflecting it. The thermometer handles the water temperature, since that's what governs how quickly the molding powder firms up.

The result is a glow-in-the-dark pink clone with a motor already inside it. The tube is 10.8 inches by 2.5, the silicone is medical-grade platinum cure throughout, and the kit comes from Empire Labs.

Measure first, take the mold, then stir the glow through before you pour.

Expert Tip: Stir the glow powder all the way through the silicone before any of it reaches the mold. Pigment left sitting in one spot gives you a clone that glows in patches.

MeasurementsMolding Tube Length: 10.8"
Molding Tube Width: 2.5"
Vibration: Single speed
Clone Material: 100% Platinum-Cure Medical-Grade Silicone
Molding Material: Algae-based molding powder
Included In The Set: Silicone, glow powder, molding powder, molding tube, single-speed vibrator, stir stick, disposable thermometer, instructions
Not Included: Scissors, mixing bowl and utensils, disposable bowl or cup, cardboard square
Lube: Water-based only

Color: Glow-In-The-Dark Pink

Care: Use with water-based lubricant. Wash with warm water and toy cleaner after each use. Pat dry and store in a cool, dry location, away from direct sunlight and separated from other toys.