Clone-A-Willy Medium Skin Tone

Clone-A-Willy runs in two stages: algae-based powder mixed with water makes the mold, and platinum-cure medical-grade silicone poured into that mold makes the copy you keep. The thermometer is in the set for the water temperature, which controls the set speed. The clone comes out in a medium skin tone with a single-speed vibrator already bedded into it, so there's no assembly once it leaves the tube. Tube dimensions are 10.8 inches by 2.5, the silicone is 100% platinum-cure medical grade, and Empire Labs builds the kit. What you cast from it is yours to keep, and platinum-cure silicone doesn't break down the way a cheaper material does over a few years of use. Check the sizing, mix the powder, and cast the copy. Expert Tip: Take the water temperature rather than guessing at it. Warm water sets the powder faster and cold water slows it down, and the thermometer is in the box for that one job. Measurements: Molding Tube Length: 10.8" Molding Tube Width: 2.5" Vibration: Single speed Clone Material: 100% Platinum-Cure Medical-Grade Silicone Molding Material: Algae-based molding powder Included In The Set: Silicone, molding powder, molding tube, single-speed vibrator, stir stick, disposable thermometer, instructions Not Included: Scissors, mixing bowl and utensils, disposable bowl or cup, cardboard square Lube: Water-based only Color: Medium Skin Tone Care: Use with water-based lubricant. Wash with warm water and toy cleaner after each use. Pat dry and store in a cool, dry location, away from direct sunlight and separated from other toys.

Product Highlights:

• Algae-Based Molding Powder: Mixed with water in a bowl you supply, setting fast enough to take the mold in minutes and fine enough to record skin texture.
• Platinum-Cure Medical-Grade Silicone: Poured into the finished mold to form the clone, giving you a body-safe copy that keeps its detail over the long term.
• Single-Speed Vibrator Included: Bedded into the clone while it is still curing, leaving the finished piece working from the moment it leaves the tube.
• 10.8 Inch Molding Tube: Running 10.8 inches long by 2.5 inches wide, a figure to check against the subject before you start.
• What Is In The Box And What Is Not: Sold with silicone, powder, tube, vibrator, stir stick, thermometer and instructions, meaning the only things to gather are scissors, a bowl and some cardboard.

Clone-A-Willy runs in two stages: algae-based powder mixed with water makes the mold, and platinum-cure medical-grade silicone poured into that mold makes the copy you keep. The thermometer is in the set for the water temperature, which controls the set speed.

The clone comes out in a medium skin tone with a single-speed vibrator already bedded into it, so there's no assembly once it leaves the tube. Tube dimensions are 10.8 inches by 2.5, the silicone is 100% platinum-cure medical grade, and Empire Labs builds the kit. What you cast from it is yours to keep, and platinum-cure silicone doesn't break down the way a cheaper material does over a few years of use.

Check the sizing, mix the powder, and cast the copy.

Expert Tip: Take the water temperature rather than guessing at it. Warm water sets the powder faster and cold water slows it down, and the thermometer is in the box for that one job.

Measurements:

Molding Tube Length: 10.8"
Molding Tube Width: 2.5"
Vibration: Single speed
Clone Material: 100% Platinum-Cure Medical-Grade Silicone
Molding Material: Algae-based molding powder
Included In The Set: Silicone, molding powder, molding tube, single-speed vibrator, stir stick, disposable thermometer, instructions
Not Included: Scissors, mixing bowl and utensils, disposable bowl or cup, cardboard square
Lube: Water-based only

Color: Medium Skin Tone

Care: Use with water-based lubricant. Wash with warm water and toy cleaner after each use. Pat dry and store in a cool, dry location, away from direct sunlight and separated from other toys.